Display Qos-Interface Traffic-Statistic - H3C s3100 series Command Manual

Example
# Display the traffic shaping configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-shape
Ethernet1/0/1
QID: status
----------------------------------------------------
0 : Enable
1 : Enable
2 : Enable
3 : Disable
Table 1-7 Description on the fields of the display qos-interface traffic-shape command
Ethernet1/0/1
QID
status
max-rate(kbps)
burst-size(byte)

display qos-interface traffic-statistic

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-statistic
View
Any view
Parameter
interface-type interface-number:
accounting configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic accounting configuration of
all the ports on the device is displayed.
Description
Use the display qos-interface traffic-statistic command to display the traffic accounting configuration
of a port or all the ports on the device. This command also displays traffic statistics.
Related command: traffic-statistic.
max-rate(kbps) burst-size(byte)
64
64
640
0
Field
Specifies the type and number of a port, for which the traffic
8
8
16
0
Description
Port with traffic shaping configured
Queue ID
traffic shaping status of a queue
Maximum traffic rate of a queue
Burst size of a queue
1-13