10.0 RTU Menu (About, Name and Date/Time)
Creating a unique RTU name for each test probe makes it easier to associate test results and
alarm notifications when several RTUs are being used on the same network. These settings will
also be used if the RTU is integrated with the VeSion central server or an external third-party
server.
Use the RTU menu to set the probe name and the date/time.
Naming your RTU
After assigning the RTU a unique name, it will be displayed at the top right corner.
RTU name is shown
To change the Date/Time on the RTU to match your local time zone, select RTU Date/Time,
set the date and time, and then click Apply.
Setting Date/Time for RTU
In the About section, you can check details about your RTU. To do that, select RTU About.
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Page 24 of 44