Table of Contents
Advertisement
16.0 Upgrading RTU-4000/RTU-4100 Software
To upgrade the probe software to the most recent version:
1. Download the software upgrade zip file from the product page on the VeEX website,
www.veexinc.com, and then extract the files to a location on your hard drive.
2. Launch the Probe Configuration Tool.
3. Click the Select Probe Type drop-down list box arrow, and then select RTU-4000.
4. Select the Ethernet option button and enter the static IP address you assigned to the
probe at an earlier time (see the Assign a static IP address to probe), and then click
Connect. In the Status box, a Connection succeeded message appears.
5. In the Software Upgrade group box, click Select File, navigate to the folder in which
you extracted the upgrade files, and then click the install_RTU-4000.sh file.
6. Click Upgrade. In the Status box, a message appears that the upgrade is finished and
the probe reboots automatically.
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Probe Configuration Tool: Upgrade Software
Page 39 of 44
Advertisement
Table of Contents
