Assigning Static Ip Address To Probe; Connecting The Unit To Ethernet - VeEX RTU-4000 User Manual

6.3

Assigning static IP address to probe

To assign a static IP address to the probe:
1. In the Probe Setting group box, use the field definitions listed below to enter the
information requested.
2. Click Apply. The IP address is now assigned to the probe.
• Probe Number: Number that uniquely identifies the probe. This number will correspond
to the probe number in VeSion.
• Probe Server Port #: Port number for the probe.
• Probe Server IP: VeSion server IP address.
• Local IP: IP address you want to assign to the probe.
• Local Subnet: Subnet mask number for probe.
• Local Gateway: Gateway IP for the probe.
6.4

Connecting the Unit to Ethernet

After assigning a new static IP address to the probe, connect the unit to your network via the
Ethernet port with the Ethernet cable.
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Probe Configuration Tool: Assigning static IP to probe
Page 20 of 44