Tools; Ip Tools; Ip Connection; Ping - VeEX VePal CX350 User Manual

CX350 e-Manual D07-00-037 RevC01

8.0 Tools

The V300 common tools

8.1 IP Tools

8.1.1 IP connection

8.1.2 Ping

8.1.3 Trace Route

8.1.4 Web/FTP

8.1.5 ARPwiz

8.1.6 VoIP

8.2 NetWiz

8.3 WiFiWiz

8.4 Advanced

8.4.1 ReVeal EZ connect

8.4.2 Packet capture

8.4.3 Fiber Scope

8.4.4 WiFi Spectrum Analyzer

8.4.5 Data Card/GPS

8.4 6 Signature Pad

Go back to top Go back to TOC
8.1 IP Tools
8.1.1 IP Connection
Setup
Enter a Static IP address or use DHCP to connect to the network.
If DHCP is selected, an IP address will be automatically assigned to the test set. The user can also turn the DNS server option On
or Off.
If a Static connection mode is selected, the user is required to enter a Local IP, Subnet, Gateway, and DNS IP (if the DNS server
option is turned on). A DNS IP address is required when using URL format as a destination address.
IP Connection - DHCP Mode
IP Connection - Static Mode
Page 51 of 81