Advertisement
Refit the rear bumper (
Fill the cooling system (
Check the Shell Transaxle 75W-90 GL5 gear oil level (
Inspect the hydraulic clutch system oil level Shell DCT F-3 (
Refit the rear flat undertray diffuser (
Removing the single oil heat exchanger mounting subframe
Remove the water/gear oil/clutch hydraulic system oil single oil heat exchanger (
E3.04).
A3.07).
E3.12).
Remove the plugs placed previously.
Fit the coolant delivery pipe (1) on the single oil
heat exchanger (A) and fasten by tightening
the indicated clamp.
Tightening torque
Screw collar
A3.02).
A3.03).
Undo the screws and nuts indicated.
Remove the single oil heat exchanger mounting
subframe (A).
Nm
Class
4 Nm
B
C2.05).
Advertisement
