Advertisement
Before lifting the intake manifold, check that
all the nuts and washers removed have
been retrieved so that they cannot fall
into the intake ducts.
On the left hand bank, undo the eight screws
with washers fastening the intake manifold
(A) to the cylinder head.
Note that the photo was taken with all
components not involved in the procedure
removed to illustrate the operation more
clearly.
Before lifting the intake manifold, check that
all the nuts and washers removed have
been retrieved so that they cannot fall
into the intake ducts.
On the right hand bank, undo the eight screws
with washers fastening the intake manifold
(A) to the cylinder head.
Note that the photo was taken with all
components not involved in the procedure
removed to illustrate the operation more
clearly.
With the assistance of another person, lift the
intake manifold (A) from the cylinder heads,
as shown in the figure.
Advertisement
