Ferrari California Workshop Manual page 618

Hide thumbs Also See for California:

Removing the pedal board

Disconnect the battery (

Remove the dashboard (

Refitting the pedal board

Tightening torque

Pedal board - firewall

Fastening brake servo - pedal board

Disconnect the connector (1) from the brake

pedal stop light switch (C).

Detach the servo brake linkage from the pedal by

releasing the clips (2).

Remove the retainer clip (3), remove the pin (4)

then remove the brake pedal (B).

Remove the six fasteners indicated (four nuts

fastening the pedal board to the servo brake

and two screws fastening the pedal board to

the firewall) and remove the pedal board (A)

from the passenger compartment.