Advertisement
Immobilise the crankshaft.
Refit the transmission housing (
FROM Engine No. 181233
Apply a sufficient layer of ROLOIL Copper
Fit the flywheel (A).
Hand tighten the screws indicated.
Pre-tighten the four screws indicated by numbers
Tightening torque
Pretightening torque for screw
Definitively tighten the screws in the sequence:
Tightening torque
Screw
C4.03).
Grease - copper based grease for high
temperatures on the splining and on the O-
rings to fill the teeth grooves completely.
circled in red, in the sequence: (1-2-3-4).
(5-6-7-8-1-2-3-4).
Nm
Class
45 Nm
A
Nm
Class
91 Nm
A
Advertisement
