Advertisement
Tightening torque
Fastening brake servo - pedal board
Brake fluid pipes - master brake cylinder
Depress the brake pedal fully to engage the pedal itself with the brake servo linkage.
Release the brake pedal and ensure that it is effectively attached to the linkage.
Nut
Union
Assess the condition of the firewall gaskets (5);
replace if necessary.
Place the brake servo (A), complete with pump,
in the engine compartment, install the two
firewall gaskets correctly (5), with the relative
shim (6), and fit in the relative seat on the
pedal board.
Working from under the dashboard on the driver
side, tighten the four nuts indicated fastening
the brake servo to the pedal board (4).
Note that the photo aside was taken with the
dashboard removed to illustrate the
operation more clearly.
Tightening torque
Nut
Nm
Class
20 Nm
B
16 Nm
B
Nm
Class
20 Nm
B
Advertisement
