ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the brackets (15) from the bracket (6),
undoing the indicated fasteners.
Move the hydraulic clutch system oil pipes out of
the way so that they do not hinder the
subsequent operations.
ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the mounting bracket (16) for the gear
oil pipes (18), undoing the screws (17).
Remove the two pipe retainer brackets (19) from
the mounting bracket (16), by undoing the
fasteners indicated.
ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the clamp (20) from the bodyshell.
Disconnect the unions (21).