Ferrari California Workshop Manual page 711

Replacing front stabiliser bar tie-rods
Tightening torque
Fastening spherical tie-rod - lower arm
Fastening front stabiliser bar - spherical tie-rod
Spherical tie-rod
Nut
Undo the nut (1).
Undo the pin (2).
Remove the spherical tie-rod (A) and replace it.
Fit the new spherical tie-rod (A).
Tighten the pin (2).
Tightening torque
Spherical tie-rod
Tighten the nut (1).
Tightening torque
Nut
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Undo the nut (1).
Undo the pin (2).
Remove the spherical tie-rod (A) and replace it.
Fit the new spherical tie-rod (A).
Tighten the pin (2).
Tightening torque
Spherical tie-rod
Tighten the nut (1).
Tightening torque
Nut
Nm Class
50 Nm B
50 Nm B
Nm Class
50 Nm
Nm Class
50 Nm
Nm Class
50 Nm
Nm Class
50 Nm
B
B
B
B