Advertisement
B2.02
Refitting the complete engine
Installing the RETROFIT KIT FOR ENGINES WITH DUAL HEAT EXCHANGER, Part No. 270157
Tightening torque
Fastening the seal flange
The kit consists of the following components:
2 x TCEI M6x18 screws Part No. 231617;
Toroid O-ring Part No. 264447;
Water drain seal flange Part No. 265562.
Screw (Part No. 231617)
Fit the toroid O-ring in the relative seat on the
seal flange (A).
Fit the seal flange (A).
Tighten the screws indicated.
Tightening torque
Screw (Part No. 231617)
Undo the plug (B) from the new engine.
Nm
Class
8 Nm
B
Nm
Class
8 Nm
B
Advertisement
