Advertisement
CAUTION
The oil contained in the hydraulic steering system is harmful to the eyes and skin and may also damage the
vehicle bodywork.
For vehicles UP TO Assembly No. 98001, in the event of replacing the power steering fluid reservoir and the
pipe leading from the power steering fluid reservoir to the power steering pump, the components of
RETROFIT KIT Part No. 279663 must be installed.
The power steering fluid specified FROM Assembly No. 98002 must be used following installation of the
components of the RETROFIT KIT Part No. 279663.
Fill the power steering system (
Refit the engine compartment cosmetic shields (
Tightening torque
Screw collar
Screw collar
Tightening torque
Nut
D5.07).
E3.13).
Connect the two pipes (2) to the power steering
fluid reservoir (A) and fasten by fitting and
tightening new collars.
Fit the power steering tank (A) onto its mounting
bracket.
Tighten the nuts fastening the power steering
tank (A).
UP TO Assembly No. 85542 and FROM
Assembly No.97978, connect the breather
pipe (1) to the cap.
FROM Assembly No. 85543 TO Assembly
No.97977, connect the breather pipe (1) to
the cap.
Nm
Class
4 Nm
B
4 Nm
B
Nm
Class
24 Nm
B
Advertisement
