Advertisement
Operate the lowering handle of the trolley to lower the rear removable subframe completely.
Remove the two front heat shields located above the exhaust extensions.
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Remove the EPB parking brake Bowden cable
(35) from the rear removable subframe.
Remove the two lower heat shields (67) and (68)
on the rear removable gearbox subframe, by
undoing the screws indicated.
ONLY for vehicles WITHOUT single oil heat
exchanger
Clean the area surrounding the GL pipe
fastening points thoroughly with a suitable
degreaser that does not leave residue.
Place absorbent paper under the unions to
collect any oil spillage.
Undo the screw (70) fastening the fork (71)
retaining the GL pipes.
Remove the clamp indicated retaining the GL
pipes (69).
Advertisement
