Ferrari California Workshop Manual page 480

Hide thumbs Also See for California:

ONLY for vehicles WITH single oil heat

Fasten the coolant return pipe (14) tightening the

nuts indicated on the clamps, after fitting the

shim (15), as shown in the photo.

Tightening torque

ONLY for vehicles WITH single oil heat

Fit the coolant delivery pipe (12) in the relevant

seat on the gearbox.

Fasten the coolant delivery pipe (12) by

tightening the nuts indicated on the clamps,

after fitting the shim (13), as shown in the

Tightening torque

ONLY for vehicles WITH Single Oil Heat

Exchanger FROM Assembly No. 103179

(consult the Spare Parts Catalogue to identify

vehicles not affected by modification)

Fit and fasten the coolant delivery pipe (12) and

the coolant return pipe (14), tightening the

indicated screws.

Tightening torque