Advertisement
Connect the connector (2).
After replacing the seals, fit the pipe (6) leading
from the radiator to the steering box in its
relative seat and tighten the pipe union (5).
Tightening torque
Pipe union
Connect the tie-rod (B) to the stub axle (C).
Pretighten the nut (1).
Perform the procedure on both sides of the
vehicle.
FROM Assembly No. 98482, there is a recess
on the ball stud to facilitate tightening the
nut (1).
Tightening torque
Nut (pretightening)
Loosen the nut (1) then tighten again.
Perform the procedure on both sides of the
vehicle.
Tightening torque
Nut
Nm
Class
35 Nm
B
Nm
Class
40 Nm
A
Nm
Class
40 Nm
A
Advertisement
