Advertisement
Check that the yellow reference markings are
correctly aligned: the marking on the threaded
rods and the marking on the Flanbloc
eyebolts must be aligned.
If the markings on the threaded rods and
Flanbloc eyebolts are not correctly aligned
after loosening the arm fastener nuts (even if
only on one threaded rod), a ROL (Red On
Line) must be opened, attaching adequate
photographic documentation, and contact the
Ferrari Help Desk.
If the markings on the threaded rods and
Flanbloc eyebolts are correctly aligned after
loosening the arm fastener nuts, completely
undo and remove the arm fastener nuts in the
order given for the previous operation.
Check again that the yellow reference markings
are correctly aligned: the markings on the
threaded rods and the markings on the
Flanbloc eyebolts must be aligned.
Using a delible yellow marker pen or paint, make
reference markings on the threaded rods and
relative nuts and the eyebolts of the Flanblocs
fastening the lower arm.
Advertisement
