Advertisement
Replace the plug (1), fitting and tightening the
new component.
Tightening torque
Plug
Undo the threaded plug (7), located on the left on
the bottom of the differential housing.
There is a small pipe above the threaded plug
for filling and checking the level of the
system.
Using the pump
(AV
(with the long spout), aspirate the specified oil
from a newly opened container.
Using the pump
(AV
container for collecting excess oil, fill with 9.2
litres (for vehicles WITHOUT single oil
heat exchanger) or 7.75 litres (for vehicles
WITH single oil heat exchanger) via level
pipe.
Nm
25 Nm
8174) with attachment 02
8174) element 02 and a
Class
B
Advertisement
