Advertisement
Filling with Shell DCT F-3 hydraulic clutch system oil
Tightening torque
ATF and GL oil pipe mounting bracket
ATF clutch oil drain/filler plug
Screw
Plug
ONLY for vehicles WITHOUT single oil heat
exchanger
Clean the unions to be connected thoroughly
with a suitable degreaser that does not leave
residue.
Connect the clutch hydraulic oil system pipe
unions. Follow the instructions given below to
ensure proper connection:
ensure that the notch on the safety ring nut (14)
is aligned with the pin (13);
connect the male union and turn the safety ring
nut (14) so that it is no longer aligned with the
pin (13);
ALWAYS ensure that the pipe union is effectively
connected.
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the hydraulic clutch system oil delivery
and return unions (5).
Fasten the mounting bracket (3) for the hydraulic
clutch system oil pipes in the relevant seat,
after ensuring that the bushings are installed
correctly, by tightening the screws indicated
with washers.
Tightening torque
Screw
Fasten the hydraulic clutch system oil delivery
and return pipes to the bodyshell with the
clamps and the tie (4).
Nm
Class
20 Nm
B
25 Nm
B
Nm
Class
20 Nm
B
Advertisement
