Advertisement
Refit the wheels (
Refit the front wheels.
D2.01).
Turning with the arrow pointing towards the
interior of the vehicle, fit the bracket (D)
retaining the bush (C).
Using a cloth moistened with heptane,
thoroughly clean and degrease the outer
surface of the rubber bush (C) and the inner
surface of the bracket (B).
Fit the bracket (B) on the respective bush (C).
Tighten the screws indicated.
Tightening torque
Screw
Remove any excess grease from the rubber
bush (C) and bracket (B).
Tighten the nut (2) fastening the stabiliser bar (A)
to the tie-rod.
Tightening torque
Nut
Tighten the nut (3) fastening the stabiliser bar (A)
to the tie-rod.
Tightening torque
Nut
Nm
Class
30 Nm
B
Nm
Class
50 Nm
B
Nm
Class
50 Nm
B
Advertisement
