Advertisement
Removing the door sill trim panel
The following procedure is for removing the right hand door sill trim panel.
The procedure for removing the left hand door sill trim panel is identical.
Remove the kickplate (
Remove the rear wheelhouses (
Remove the front wheelhouses (
Remove the rear element.
Remove the lateral flat undertray sections (
Remove the left hand element.
E3.11).
E3.05).
E3.05).
E3.12).
Ensure that the surface of the seat for the
kickplate (B) is clean. If necessary, clean with
a degreasing product.
Fit the kickplate (B) correctly in the relative seat,
pressing over the entire outer surface to fix
evenly.
Refit the door bay perimeter seal strip (A).
Undo the three front screws indicated fastening
the door sill trim panel (A).
Advertisement
