Undo the brake fluid hose union (10).
Remove the clip (11) fastening the union (12) for
the brake fluid hose onto the relative
mounting bracket.
Remove the union (12) for the brake fluid hose
from the relevant mounting bracket.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Detach and disconnect the connector (5) for the
brake pad wear sensor.
Disconnect the ground cable (7) by undoing the
indicated nut.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Remove the indicated cable ties.
Detach the cable from the indicated clip.