Advertisement
Tightening torque
Fastening upper arm - rear hub carrier
Fastening toe-in tie-rod - rear hub carrier
Fastening axle shaft to differential flange
Fastening axle shaft to hub carrier
When refitting the same axle shaft, remove any residue of AREXONS SYSTEM 56A01 - HIGH
STRENGTH RETAINING COMPOUND.
Remove any residue of AREXONS SYSTEM 56A01 - HIGH STRENGTH RETAINING COMPOUND from
the hub carrier bearing.
Fit the axle shaft in the hub carrier bearing.
Tilt the hub carrier inward to bring the axle shaft and the differential flange together.
Fit new cable retainer clamps if the previous clamps were cut.
Nut
Nut
Screw
Nut
Check that the surface of the differential flange is
completely clean.
Apply three even and regularly spaced circular
beads of AREXONS SYSTEM 56A01 - HIGH
STRENGTH RETAINING COMPOUND.
Nm
Class
90 Nm
A
80 Nm
A
78 Nm
A
275 Nm
A
Advertisement
