Advertisement
Runway type vehicle lift
Move the car lift arms manually to align the anti-
tipping safety retainers with the relative
fastener slots on the car, to ensure correct
engagement when lifting.
If the arms of the vehicle lift come into contact
with the sill trim panels, add spacers as
described previously.
Working carefully and ensuring that the anti-
tipping safety retainers are correctly aligned
with the respective fastener slots, raise the
vehicle lift arms until the anti-tipping safety
retainers engage in the respective fastener
slots.
Lift the vehicle slightly off the ground and check
that it is stable.
Loosen the screws (9) fastening the positioning
levers (7).
Turn the positioning levers (7) by 180°.
Unscrew the positioning levers (7).
Completely tighten the screws (9) fastening the
positioning levers (7).
Lift the vehicle lift arms until the car is the
desired height from the ground.
Fit the specific rubber pads (A) on the vehicle lift
points not used for fastening the anti-tipping
safety retainers
Raise the vehicle lift runways slightly to facilitate
installation of the anti-tipping safety retainer
mounting brackets
(AV
8184).
Advertisement
