Advertisement
In relation to the measurements, move the exhaust system forwards or backwards as described as follows.
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Loosen the indicated fastener nuts between the catalytic
converters (B) and the central compensator.
FROM Assembly No. 103179 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification)
Loosen the indicated fastener nuts between the catalytic
converters (B) and the central compensator.
Using a crowbar (4), move the exhaust system of the cylinder
bank forwards until the lateral and rear exhaust silencer
mounting pins protrude by ≥ 3 mm.
Moving the exhaust system forwards increases the protrusion of
the exhaust extension mounting pins and decreases the
protrusion of the exhaust silencer mounting pins.
Using a crowbar (4), move the exhaust system of the cylinder
bank backwards until the lateral and rear exhaust silencer
mounting pins protrude by ≥ 3 mm.
Moving the exhaust system back reduces the protrusion of the
exhaust extension mounting pins and increases the
protrusion of the exhaust silencer mounting pins.
Advertisement
