Advertisement
Filling gear oil system with mechanical gearbox
Tightening torque
Fastening mechanical gearbox oil filter
ATF and GL oil pipe mounting bracket
Fastening magnetic oil drain plug for mechanical
gearbox
Fastening plug for mechanical gearbox speed
sensor seat
To disconnect the gear oil pipes, turn the safety
ring nut (14) to align the notch on the ring nut
with the pin (13).
Push the safety ring nut (14) towards the pin (13)
to release the pipes.
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Allow the liquid remaining in the gear oil pipes to
drain completely.
If necessary, blow compressed air into the
pipes to speed up and facilitate drainage.
Place a container under the oil filter (6).
Undo the screw fastening the oil filter (6).
Remove the O-ring on the filter and clean the oil
filter (6), immersing in degreasing solution.
Take care not to damage the mesh.
Dry the oil filter (6) with compressed air.
Screw
Screw
Plug
Screw
Nm
Class
5 Nm
C
20 Nm
B
49 Nm
B
5 Nm
C
Advertisement
