Advertisement
A3.29
Inspecting the brake system
Inspecting the brake system
Remove the wheels (
Remove all.
Remove the engine compartment cosmetic shields (
Remove the left hand lateral cosmetic shield.
Check the connection pipes leading to the callipers and to the unions on the rigid lines.
Check that there is no leakage near the brake master cylinder unions or on the electrohydraulic unit.
Check that the unions are properly tightened.
Check that the instrument panel warning lights function correctly.
If any leakage is found, replace the defective unions or pipes.
Fill and bleed the brake system (
D2.01).
D3.10).
E3.13).
Advertisement
