Advertisement
D4.01
Complete suspension
Removing the entire front suspension
The following procedure is for the removal of the right hand front suspension.
The procedure for removing the left hand front suspension is the same.
Note that in some of the following images the vehicle is shown with the wheelhouse and the front flat
undertray section removed. However, removal of these components is not necessary.
For magnetorheological shock absorbers only (optional). Remove the engine compartment cosmetic
shields (
E3.13).
Remove lateral cosmetic shields.
Disconnect the battery (
Remove the wheels (
F2.01).
D2.01).
Undo the nut (1) fastening the steering box tie-
rod (A) to the hub carrier.
FROM Assembly No. 98482, there is a recess
on the ball stud to facilitate loosening the
nut (1).
Undo the nut (2) fastening the stabiliser bar (B)
to the spherical tie-rod.
Advertisement
