Advertisement
Refit the rear flat undertray section (
Refit the wheels (
Calibrate the EPB electric parking brake (
This procedure must only be performed if, at Key-ON, the NPB parking brake node identifies a fault,
indicated on the instrument panel and on the TFT display by the specific warning lamps, and with
error C155A on the NPB (EPB calibration error) and error C1313 on the NFR (parking brake
error).
E3.12).
D2.01).
Press on the two indicated fastener tabs and fit
the right hand EPB Bowden cable sheath (9)
into the relative mounting bracket.
Attach the end (8) of the right hand EPB Bowden
cable (9) to the EPB linkage bracket.
Refit the clip (7) in the relative seat on the EPB
linkage bracket.
Left hand axle shaft
Press on the two indicated fastener tabs and fit
the left hand EPB Bowden cable sheath (9)
into the relative mounting bracket.
Attach the end (8) of the left hand EPB Bowden
cable (9) to the EPB equaliser (7).
Move the EPB equaliser (7) to the right.
D3.07).
Advertisement
