Advertisement
Windscreen cross member trim panel
Bring the RHT electrically into the Spider position, completing the opening cycle.
Remove the cabin light (
Remove both sun visors.
Remove both internal windscreen pillar trim panels.
E5.18).
Right
Using a suitable tool, detach the top part of the
internal windscreen pillar trim panel (A) first
and then the lower part from the relative seat.
Remove the internal windscreen pillar trim panel
(A) from the vehicle.
On the left-hand side, undo the screw (1)
fastening the fixing plate (A).
Remove the fixing plate (A) from the relative seat.
Advertisement
