Advertisement
Remove the complete suspension assembly from its seat, retrieving the washers from the upper arm stud
bolts.
Refitting the entire front suspension
Tightening torque
Fastening upper arm to chassis
Fastening shock absorber to chassis
Fastening shock absorbers to chassis (FROM
Assembly No. 103179)
Fastening lower arm to chassis
Fastening brake pad sensor ground cable
Check that the yellow reference markings are
correctly aligned: the marking on the threaded
rods and the marking on the Flanbloc
eyebolts must be aligned.
If the markings on the threaded rods and
eyebolts are not correctly aligned after
loosening the arm fastener nuts (even if only
on one threaded rod), a ROL (Red On Line)
must be opened, attaching adequate
photographic documentation, and contact the
Ferrari Help Desk.
If the markings on the threaded rods and
eyebolts are correctly aligned after loosening
the arm fastener nuts, completely undo and
remove the arm fastener nuts in the order
given for the previous operation.
Move the shock absorber aside to facilitate the
operation.
Check again that the yellow reference markings
are correctly aligned: the markings on the
threaded rods and the markings on the
Flanbloc eyebolts must be aligned.
Nut (pretightening)
Nut
Screw (pretightening)
Screw
Screw (pretightening)
Screw
Nut (pretightening)
Nut
Nut
Nm
Class
25 Nm
A
60 Nm
A
10 Nm
A
30 Nm
A
20 Nm
A
110 Nm
A
25 Nm
A
60 Nm
A
6 Nm
B
Advertisement
