Advertisement
Check that the yellow reference markings are
correctly aligned: the marking on the threaded
rods and the marking on the Flanbloc
eyebolts must be aligned.
Only the nut must turn, the threaded rod must
remain in its original position.
If the markings on the threaded rods and
eyebolts are not correctly aligned after
loosening the arm fastener nuts (even if only
on one threaded rod), a ROL (Red On Line)
must be opened, attaching adequate
photographic documentation, and contact the
Ferrari Help Desk.
If the markings on the threaded rods and
eyebolts are correctly aligned after loosening
the arm fastener nuts, completely undo and
remove the arm fastener nuts in the order
given for the previous operation.
Check again that the yellow reference markings
are correctly aligned: the markings on the
threaded rods and the markings on the
Flanbloc eyebolts must be aligned.
Support the weight of the suspension adequately.
DO NOT use lubricants or electric/pneumatic
drivers.
Undo the indicated screws fastening the shock
absorber (D) to the chassis.
Advertisement
