Advertisement
08) Gradually introduce coolant via the
expansion tank filler orifice, until fluid escapes
from the bleed orifices on the cylinder heads.
09) Tighten the right hand bleed plug indicated,
after replacing the relative seal.
Tightening torque
M12x1.25x12 plug
10) Tighten the left hand bleed plug indicated,
after replacing the relative seal.
Tightening torque
M12x1.25x12 plug
11) Gradually introduce coolant via the
expansion tank filler orifice, until fluid escapes
from the delivery pipe (3) leading to the heat
exchanger.
12) Fasten the delivery pipe (3) leading to the
heat exchanger by tightening the union (2),
after replacing the relative seals.
Tightening torque
Pipe union
Nm
Class
30 Nm
B
Nm
Class
30 Nm
B
Nm
Class
50 Nm
A
Advertisement
