Advertisement
Lift the engine assembly slowly, separating from the respective removable subframe, and set down
carefully in a safe place.
Replacing the rubber engine bushings
Tightening torque
Fastening engine strut to engine bushing
Remove the central flat undertray section (
Remove the front wheelhouses (
Remove the rear sections of the front wheelhouses.
Remove the front removable subframe (
On both sides, remove the heat shield (79),
On both sides, remove the rubber lined bracket
UP TO Assembly No. 95407, on both sides,
FROM Assembly No. 95408, on both sides,
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
On both sides, remove the heat shield (79),
On both sides, remove the rubber lined bracket
On both sides, undo the nut (81).
Screw
Nut
E3.12).
E3.05).
E2.02).
detaching the indicated clips.
(80), undoing the indicated nut.
undo the screw (81).
undo the nut (81).
undoing the indicated screws.
(80), undoing the indicated nut.
103 Nm
103 Nm
Nm
Class
A
A
Advertisement
