Advertisement
ONLY for vehicles WITHOUT single oil heat exchanger
Remove the rear flat undertray section (
Open the plastic clamps (4) on the power
steering system pipes.
E3.12).
ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the mounting bracket (6) for the
hydraulic clutch system oil pipes, by undoing
the screws (7).
Remove the clamps (8) and (12), by undoing the
screws (9).
Remove the pipes from the mounting bracket
(10) and detach the delivery and return
unions (11).
ONLY for vehicles WITHOUT single oil heat
exchanger
To disconnect the clutch hydraulic system oil
pipes, turn the safety ring nut (12) to align the
notch on the ring nut with the pin (13).
Push the safety ring nut (12) towards the pin (13)
to release the pipes.
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Allow the liquid remaining in the clutch hydraulic
system oil pipes to drain completely.
Advertisement
