Inspect the hydraulic clutch system oil level Shell DCT F-3 (
ONLY for vehicles WITHOUT single oil heat exchanger. Check that there is no leakage from the drain plug
and from the delivery and return unions disconnected during the draining procedure.
ONLY for vehicles WITH single oil heat exchanger. Check that there is no leakage from the drain plug.
Fill with half of the quantity indicated, wait a few
minutes for the oil to settle, then gradually
finish filling, until oil overflows from the level
pipe (8).
The quantity of oil required may vary slightly
relevant to the amount indicated for filling
the tank when empty; this is due to
unavoidable pooling within the system. Fill
gradually.
A3.03).