Advertisement
Tighten the indicated screw fastening the EPB
Bowden cable sheath (8).
Tightening torque
Screw
Tighten the nut (7) fastening the ground cable
onto the bracket on the EPB Bowden cable
sheath (8).
Tightening torque
Nut
Attach the cable grommet (6) to the relative
bracket on the EPB Bowden cable sheath (8).
Fit a new cable tie (5) for retaining cables.
Attach the cable grommet (4) onto the relative
mounting bracket.
Connect the connector (2) for the brake pad
wear sensor.
Connect the connector (3) for the ABS sensor.
Attach the tie-rod (1) for the NRRPS motion
sensor onto the lower arm.
Nm
Class
8 Nm
B
Nm
Class
6 Nm
B
Advertisement
