Advertisement
Refit the windscreen wiper linkage (
Replace the ignition switch (
Perform refitting ONLY if the steering column has been replaced.
Refit the binnacle (
Refit the steering column switch (
Refit the steering wheel (
Refit the central flat undertray section (
Connect the battery (
E3.09).
E5.08).
E4.02).
E5.10).
E5.09).
E3.12).
F2.01).
Tighten the two upper screws fastening the
steering column (A) to the dashboard.
Note that it is not necessary to remove the
lower left dashboard trim panel as shown in
the photo.
Tightening torque
Screw
Connect the steering column (A) to the steering
box (B), by tightening the screw (1) fastening
the universal joint (C).
Tightening torque
Special screw
Nm
Class
8 Nm
B
Nm
Class
30 Nm
B
Advertisement
