Advertisement
Refit the door panel (
Operation necessary if the component has been removed.
Refit the passenger compartment trim panels (
Operation necessary if the components have been removed.
Refit the lower and upper lateral elements.
E3.08).
If removed previously, refit the rubber cap (16) in
the recess for the quarterlight preload
adjuster dowel and the filler foam rubber (15),
after shaping by hand as required, as
originally fitted.
If removed previously, refit the foam rubber (19),
gluing into place as originally fitted.
Fit the front seat belt guide bracket (20) in the
relative seat and fasten by tightening the
three screws indicated.
Tightening torque
Screw
Undo the screw (22).
Fit the foam rubber complete with mounting
bracket (21) in the relative seat on the
quarterlight assembly bracket (red arrow) and
fasten by tightening the two screws indicated.
Before fastening the mounting bracket, ensure
that the front seat belt has been threaded
through the slot in the bracket itself.
Tightening torque
Screw
E4.04).
Nm
Class
24 Nm
B
Nm
Class
9.5 Nm
B
Advertisement
