Advertisement
08) Gradually introduce coolant via the
expansion tank filler orifice, until fluid escapes
from the bleed orifices on the cylinder heads.
09) Tighten the right hand bleed plug indicated,
after replacing the relative seal.
Tightening torque
M12x1.25x12 plug
10) Tighten the left hand bleed plug indicated,
after replacing the relative seal.
Tightening torque
M12x1.25x12 plug
11) Gradually pour coolant through the
expansion tank filler neck and allow for the
single oil heat exchanger circuit to fill in until
some fluid comes out of the return rigid pipe
from single oil heat exchanger.
12) Fasten the return pipe (2) from the single oil
heat exchanger on the rigid pipe and tighten
the indicated clamp.
Tightening torque
Screw collar
Nm
Class
30 Nm
B
Nm
Class
30 Nm
B
Nm
Class
4 Nm
B
Advertisement
