Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Support the weight of the suspension adequately.
DO NOT use lubricants or electric/pneumatic
drivers.
Undo the indicated screws fastening the shock
absorber (D) to the chassis.
Using a delible yellow marker pen or paint, make
reference markings on the threaded rods and
relative nuts and the eyebolts of the Flanblocs
fastening the upper arm.
Detach the tie-rod (9) for the NRRPS motion
sensor from the upper arm (E).
Magnetorheological shock absorbers (optional)
only.
DO NOT use lubricants or electric/pneumatic
drivers.
Partially loosen the indicated nuts fastening the
upper arm (E) in the following order: (a), (b),
(c), (d).
Move the shock absorber aside to facilitate the
operation.
Advertisement
