Advertisement
Removing the engine
Fit and apply the plugs (C) in the front fastener
slots.
Removing the gearbox
Fit and apply the plugs (B) in the rear fastener
slots.
Undo and remove the screws (9) fastening the
positioning levers (7) onto the bushings (6).
Holding the positioning levers to prevent them
from turning (7), undo the nuts (8).
Unscrew the positioning levers (7) from the
bushings (6).
Undo the bushings (6) from the eccentric pins (4).
Remove the eccentric pins (4) from the relative
seats.
Preventing the ring nuts from turning (5),
manually unscrew the sleeves (2) and
remove both components, together with
relative shims, from the car lift arms.
Advertisement
