Advertisement
ONLY for vehicles WITH Single Oil Heat
Exchanger FROM Assembly No. 103179
(consult the Spare Parts Catalogue to identify
vehicles not affected by modification)
Fasten the coolant delivery pipe (12) and the
coolant return pipe (14), tightening the
indicated nuts.
Tightening torque
Nut / Screw
ONLY for vehicles WITH Single Oil Heat
Exchanger FROM Assembly No. 103179
(consult the Spare Parts Catalogue to identify
vehicles not affected by modification)
Fasten the coolant delivery pipe (12), tightening
the indicated screws.
Tightening torque
Screw
ONLY for vehicles WITH single oil heat
exchanger
Clean the area surrounding the ATF pipe
fastening points thoroughly with a suitable
degreaser that does not leave residue.
Place absorbent paper under the plugs to catch
any oil spillage.
Remove the plugs installed previously.
Replace the O-rings of the ATF delivery and
return pipes (72), lubricating the new
components before installation.
Fit and connect the ATF delivery and return
pipes (72).
Fit the fork (74) and tighten the screw (73).
Tightening torque
Screw
Nm
Class
8 Nm
B
Nm
Class
20 Nm
B
Nm
Class
20 Nm
A
Advertisement
