Advertisement
A mobile hydraulic jack or bridge crane with a minimum load capacity of 300 Kg, and two 2.5 m long safety
belts are necessary to detach the engine assembly from the respective removable subframe.
Position the lift hook over the engine.
CAUTION
To ensure safety, the straps must be located securely on the engine assembly, taking care not to crush any
cables or pipes.
Harness the engine assembly securely.
Attach the ends of the belts to the lift hook.
Raise the lift hook to place the lift belts under slight tension.
Undo the screws (77) fastening the bracket onto
the transmission housing bushing.
Undo the nut (78) fastening the front removable
subframe to the transmission housing
bushing.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Undo the screws (77).
Remove the bracket (85).
Undo the nut (78) fastening the front removable
subframe to the transmission housing
bushing.
Advertisement
