Advertisement
Balance the wheels (
Wheel balancing
Only use self-adhesive counterweights. In addition to damaging the wheel rim, other types of
counterweights can interfere with parts of the suspension or detach while driving.
D2.02).
Release the wheel from the clamps (2) on the
table.
Refit the core of the valve (A).
To ensure that the bead is mounted correctly,
inflate the tyre immediately, while the beads
are still lubricated.
The tyre must be inflated to activate the tyre
pressure monitoring system sensor. Inflate
the tyre to a pressure greater than 0.6 bar
and keep inflated at this pressure for a
few minutes.
If the maximum permissible inflation pressure of
(3.2 bar / 44 psi) is not sufficient to seat the
beads, lubricate again.
Advertisement
