Advertisement
If the luggage compartment lid does not close correctly, proceed as follows.
Remove the luggage compartment trim panels (
Remove the sill protector.
Repeat the luggage compartment lid closing test described previously.
Refit the luggage compartment trim panels (
Refit the luggage compartment lid trim panel, the rear right hand trim panel and the sill protector trim.
Turn the ignition key clockwise and hold in this
position to start the Spider to Coupé RHT roof
cycle.
When the cycle has almost ended - specifically,
when the luggage compartment lid is
approximately 50 ± 10 mm from completely
closed - return the key to the vertical position,
interrupting the RHT roof cycle.
Wait 10 seconds, then turn the key clockwise
again to complete the luggage compartment
lid closing cycle.
While the aforementioned operation is in
progress, check that the luggage
compartment lid closes correctly without
requiring manual assistance.
E4.07).
Loosen the two screws indicated.
Adjust the striker (B) along the Z axis, then
tighten the two screws indicated.
Tightening torque
Screw
E4.07).
Nm
Class
20 Nm
B
Advertisement
