Advertisement
E3.12
Flat undertray sections and vehicle lifting
Lifting the vehicle
CAUTION
Before performing any maintenance on vehicles with the Stop&Start system, turn the ignition key to 0 (Key-
OFF).
Before performing any maintenance procedures requiring the ignition key to be in position II on vehicles with
the Stop&Start system, deactivate the Stop&Start system with the relative button, ensuring that the
specific icon and the message "Stop&Start OFF" are shown on the TFT display, and that the LED on the
on/off button itself is off.
Failure to do so may result in serious injury to persons working on the vehicle and in the vicinity of the
vehicle in the event of the engine unexpectedly starting.
CAUTION
Failure to observe the operations below may pose a serious risk to the persons working or standing in the
vicinity of the vehicle.
Lift the vehicle.
Fit the two front bushings (A) in the position
indicated.
Fit the two rear bushings (B) in the position
indicated.
Advertisement
