Advertisement
Refit the crankshaft (
Refit the cylinder heads (
Refitting the crankshaft
Tightening torque
Fastening connecting rods
Products to use: SHELL Helix Ultra SAE 5W-40
Check the dimensions of the crankshaft (
Thoroughly clean the seats of the half bearings and of the bearing shims for the crankshaft.
B2.05).
B2.05).
B2.04).
Using a specific piston installation tool, fit the
pistons (A), complete with connecting rods, in
the respective cylinder sleeves.
Screw (1st pre-
tightening stage)
Screw (2nd pre-
tightening stage)
Screw (applying angle of
58°±1°)
Fit the half bearings (6) in the respective seats
on the lower crankcase shell.
Lubricate the half bearings (6) with engine oil
SHELL Helix Ultra SAE 5W-40.
Nm
Class
+1.5
0
20
Nm
-1.5
+1.5
0
30
Nm
-1.5
+15
0
70
Nm
-15
Advertisement
