Advertisement
Reassembling the magnetorheological variable-damping shock absorber (optional)
Apply grease Z2 PROTECTION to the surface of
the lower shim (E) in contact with the spring
(A).
Fit the lower shim (E) on the shock absorber.
Fit the plug (D).
Fit the spring (A).
Apply grease Z2 PROTECTION to the surface of
the upper shim (D) in contact with the spring
(A).
Fit the upper shim (C) on the shock absorber.
Fit the bushing (3), refitting the relative retainer
snap ring.
Fit the upper stop cap (B), complete with
hyperblock.
Compress the spring (A) with a suitable press.
CAUTION
Do not release the spring until the nut is tightened
onto the shock absorber strut.
Apply thread lock AREXONS SYSTEM 52A43 -
MEDIUM STRENGTH THREAD LOCK to the
thread of the strut and, installing the relative
washer (2), tighten the nut (1).
Tightening torque
Nut
Slowly release the spring (A).
Nm
Class
40 Nm
A
Advertisement
